| Customization: | Available |
|---|---|
| Type: | Spiral Separator |
| Voltage: | 24 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
UNION AMPHIBIOUS EXCAVATOR INTRODUCTION:
We UNION mainly produce 6Ton to 50Ton amphibious excavator. According to your requests, we could assemble different brands and model excavator upper parts, like DX260LC, PC200, HITACHI ZX210, EX260,CAT330.....
Also, if you have crawler excavator (New or Used) , we can only produce amphibious undercarriage (Pontoon Undercarriage) for you. Sincerely wish could have chances to do businss with you and welcome you to visit our factory!
Construction: --- UCM Amphibious excavator undercarriage ( Pontoons) is manufactured from Q345B ( Cr50 ) or A36 steel plate. So, they are allowed to be used in brackish water without affecting the pontoon's structural integrity.
The pontoon bottoms are also reinforced for rough terrain operation. Each pontoon has 3 independent watertight compartments ensuring pontoon buoyancy ,if one of them is broken.
Track shoes : --- Track shoes of UCM pontoon undercarriage are made of specially produced Q345B Steel. They are strong enough to support the whole amphibious excavator.
Also, the wide and thick track shoes could help the UCM Amphibious excavator walking ( Floating and swimming on water) faster.
Track chains : --- We assemble 3 rows of chains on each pontoon. It is more reliable and durable than 2-chain pontoon. Also, the 3-chain could raise the track shoes strength when walking on rough terrains.
UNION Amphibious excavator track chains are made of super durable 40Cr special steel. This high quality steel can guarantee long-life of chains. So, it is safer to work on deep water.
Hydraulic drive: --- According to users' requests, we could install 2 or 4 travel motor assembles on each pontoon undercarriage (amphibious excavator undercarriage). Usually, we choose DOOSAN brands travel motors.
They are reliable quality and very reasonable prices. Besides, DOOSAN travel motor could supply very enough power to drive the amphibious excavators.
UNION AMPHIBIOUS EXCAVATOR COULD BE USED TO DO :
1.Deepening of canal, river channel and river mouth
2.Swamp land clearing at mining area, plantation and forest
3.Building bund for flood prevention and land reclamation
4.Building bund wall for fish and shimp ponds and salt making industry
5.Sludge clearing of lakes, ponds and water reservoir
6.Digging trenches for oil and gas piping installation
7.Transporting and clearing landslide and flood hit area
8.Swamps and wetlands construction
9.Road construction through wetlands.
SPECIFICATION OUCM210SD ( SUMITOMO SH210-5 TOP PART )
|
Engine |
Engine model |
ISUZU AL-4HK1X |
|
Fuel |
Diesel |
|
|
Number of Cylinders |
6 |
|
|
Number of strokes |
4 |
|
|
Piston Displacement |
5.2 Ltr |
|
|
Power |
117.3Kw / 1800rpm |
|
|
Turbo charged |
YES |
|
|
Water-cooled |
YES |
|
|
Fuel tank |
410L |
|
|
Hydraulic System |
Flow rate of pump |
2 X 211 L / min |
|
Circuit of working devices |
35000KP |
|
|
Circuit of walking |
35000KP |
|
|
Circuit of turning |
28000KP |
|
|
Swing speed |
12.4 rpm |
|
|
Operate Data |
Operating Weight |
33000KG |
|
Maximum Tractive effort |
205KN |
|
|
Arm / Boom |
SUMITOMO SH210-5 standard arm |
|
|
Bucket capacity |
0.9--1.0M3 |
|
Dimensions ( UCM210SD ) |
mm |
|
|
A |
Track length |
9000 |
|
B |
Ground contact length of tracks |
5200 |
|
C |
Tail swing radius |
2750 |
|
D |
Overall length |
11200 |
|
E |
Overall height (to the top of arm) |
3880 |
|
F |
Ground clearance of counter weight |
2025 |
|
H |
Overall width |
4940 |
|
I |
Track gauge |
3440 |
|
J |
Track width |
1500 |
|
K |
Ground clearance |
1140 |
|
L |
Track height |
1840 |
|
M |
Overall height (to the top of cab) |
3870 |
|
N |
Width of the top part |
2710 |
FAQ
Q: How to install ?
A: 1., a floating box landing, the two through the tube into the floating box hole, inserted in the side of the tube, a piece of wood pad, so that the lateral tilt
2. drop another pontoon and point it through two tubes
3. after the tube is inserted, the tube is fixed by the bolt
4.. Enlarge the plate to the tank and use the U card to fix it
5., the upper part of the excavator hoist, put on the market, with wide eyes on the Qi, tighten the screws
6. connect the hydraulic oil pipe, connect the oil pipe of the motor on the float box to the excavator
Q:How to operate?
A : 1., prohibit the operation of more than 1.6 meters water depth, silt is not limited to depth
2., prohibited in the uneven, the left and right sides of the floating box, the focus of great disparity in the situation, walking operations
3. amphibious excavators use slow gear while walking, and do not use fast gear
4., start the walking state, the first step on the foot of the throttle, and then walk
5. do not press hard objects while walking
6. avoid long walking on the hard surface
7. when turning, the front of the floating body can be lifted by the power of the bucket, and when the angle is shifted, the running of the chain plate can be avoided, and the derailment of the chain plate can be avoided
Q: How to maintain?
A:1. ensure the chain tension, loose situation should be adjusted to 3-5, a chain wheel suspension track shall prevail
2. ensure that the seat four screws, and ensure ten days (or work 80 hours) to beat the butter
3. top silk, beat butter once a week
Check the screws between the 4. chains and the chain, check the screws frequently and keep the screws tight
){kind=link}