| Customization: | Available |
|---|---|
| Certification: | CE, ISO9001: 2000 |
| Condition: | Used |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Engine | ||
| Make | Caterpillar | |
| Model | 3176 ATAAC | |
| Net Power Gear 1-2 | 220 hp | 164 kw |
| Net Power Gear 3-4 | 240 hp | 179 kw |
| Power Measured @ | 2000 rpm | |
| Net Power Gear 5-6 | 240 hp | 179 kw |
| Number of Cylinders | 6 | |
| Net Power Gears 7-8 | 240 hp | 179 kw |
| Max Power | 240 hp | 179 kw |
| Displacement | 629 cu in | 10.3 L |
| Operational | ||
| Std Operation Weight - Front Axle | 11695 lb | 5305 kg |
| Std Operation Weight - Rear Axle | 29770 lb | 13504 kg |
| Std Operation Weight - Total | 41465 lb | 18809 kg |
| Max Operation Weight - Front Axle | 19425 lb | 8811 kg |
| Max Operation Weight - Rear Axle | 39084 lb | 17729 kg |
| Max Operation Weight - Total | 58509 lb | 26540 kg |
| Fuel Capacity | 110 gal | 416 L |
| Cooling System Fluid Capacity | 12.8 gal | 48.3 L |
| Hydrauilc System Fluid Capacity | 32.5 gal | 125 L |
| Transmission Fluid Capacity | 21.6 gal | 83 L |
| Circle Gearbox Fluid Capacity | 1.6 gal | 6 L |
| Tandem Case Fluid Capacity (each) | 25.5 gal | 98 L |
| Transmission | ||
| Type | direct drive, power shift, planetary | |
| Number of Gears - Forward | 8 | |
| Number of Gears - Reverse | 8 | |
| Max Speed - Forward | 26.5 mph | 42.7 km/h |
| Max Speed - Reverse | 29.4 mph | 47.3 km/h |
| Steering | ||
| Articulation L/R | 20 degrees | |
| Turning Radius | 25.9 ft in | 7.9 m |
| Front Axle | ||
| Wheel Lean | 18 degrees | |
| Oscillation - Total | 32 degrees | |
| Ground Clearance | 2.1 ft in | 645 mm |
| Hydraulic System | ||
| Pump Type | axial piston | |
| Pump Flow | 64.1 gal/min | 243 L/min |
| Relief Valve Pressure | 3500 psi | 24150 kPa |
| Moldboard | ||
| Moldboard Width | 14 ft in | 4267 mm |
| Moldboard Height | 27 in | 686 mm |
| Moldboard Thickness | 1 in | 25 mm |
| Max Depth of Cut | 17.3 in | 438 mm |
| Side Shift Left | 25.6 in | 650 mm |
| Side Shift Right | 31.1 in | 790 mm |
| Blade Pull at Max Weight | 52659.6 lb | 23886 kg |
| Blade Down Pressure | 34517.8 lb | 15657 kg |
| Circle | ||
| Diameter | 71.8 in | 1822 mm |
| Shift Left | 25.5 in | 650 mm |
| Shift Right | 20.5 in | 520 mm |
| Max Reach Outside Tires - Left | 81 in | 2057 mm |
| Max Reach Outside Tires - Right | 82 in | 2082 mm |
| Max Lift Above Ground | 16.5 in | 419 mm |
| Blade Tip Angle - Front | 40 degrees | |
| Blade Tip Angle - Rear | 5 degrees | |
| Dimensions | ||
| Height to Top of Cab | 11 ft in | 3339 mm |
| Overall Length | 30.6 ft in | 9342 mm |
| Width Over Tires | 9.3 ft in | 2817 mm |
| Wheelbase | 21.2 ft in | 6460 mm |
| Blade Base | 9.4 ft in | 2860 mm |
| Tandem Axle Wheelbase | 5.4 ft in | 1656 mm |
| Rear Ground Clearance | 1.3 ft in | 378 mm |
| Front Ground Clearance | 2.1 ft in | 645 mm |
){kind=link}